Weave Hair is known as Hair Weave extensions Malaysia Hair Imports, Machine weft hair extensions have been sewn or “wefted” to create the bundle of extensions from Loose or “bulk” 100% raw human hair is fed through are triple-head state of the art sewing machine to add a reinforced stitch near the top (root) of the individual strands.
Hair Weft Extensions
The hair weft is then folded over and stitched again to create the final weft extensions. Machine weft, hair extensions can be found on the website and made from our Cambodian Hair, Malaysian hair, Burmese hair.
Hair weft mostly used as a technique for permanent hair extensions known as (sew-ins and weave Ins) our custom made hair wefts are full from top to bottom made from single donor hair that prevents tangling and hair weft life.
Our Hair wefts allow you to choose your different hair extensions attachment method. The hair weft comes in a curtain-like shape with double-sewn ends that can be used with methods such as weaving, micro-rings, glue or make clips, according to your hair needs.
Hair Wefts vary in how long they will last, depending on the method you choose to use. They can be turned into a clip-on set which you put on in the morning and take off at night. If instead, you wish to use hair glue or microrings or the weaving method, the wefts will last 4-6 weeks installed. All of Malaysia hair Imports wefts are made of 100% Remy Virgin Human hair and can be flat-ironed, curled and styled.
Weaving – Sewing in your hair weft extensions
You can use the weaving method in several ways. If you aren’t sure, you can always ask and contact us, for tips and advice for your hair type. Before you start attaching the hair extensions that you got from us please,co-wash your hair with a deep cleansing shampoo. Do not use a conditioner with oils, or other oil styling products. Allow the hair to air dry. It should be completely dry at the time of hair install an attachment.
How-to install hair weft extensions:
Part your hair and make a section.
Use the hair in this section to create a tightly braided braid.
Begin at one edge and braid to the middle. Finish the braid with a small sheer rubber band and then braid the hair from the other side.
Measure and cut the hair weft so that the piece fits the length of the entire part you created. Attach the ends of the weft using a needle and thread to prevent the hair from dropping from the weft.
Then thread a bent needle and gently sew the hairline on the entire length of the braid.
Thoroughly secure the ends of the weft.
Repeat for the desired results and number of pieces.
Removing your weave-in extension:
Removing a weave-in hair extension is easy.
Use a small pair of scissors to carefully cut the threads attached to your hair.
Repeat for each section.
Then remove the rubber bands that hold together the braids and brush through.
Hair Weave Styling Tips!
Because your hair is braided tight to the scalp and then covered with hair extensions, it takes longer for the hair to dry. After washing your hair, it is a good idea to make sure that these parts are actually really dry. One tip is to dry your hair in sections so you can access the hidden attachments more easily.
Attaching your hair weft extensions with glue
You can also attach your hair weft with glue. There are different types of adhesive available for this method depending on the color of your hair and skin. Use dark glue for darker or brown hair, and light-colored glue for blonde or center-colored hair. As some people may be sensitive to ingredients in the glue, spot test on an area such as the hand to see if any redness occurs 48 hours before using the glue on your scalp please be careful of the cheap hair glue sold on the market today.
This is how you glue hair extensions for install:
Part your hair and make a section. Then measure and cut the weft to the length of the hair section. Attach the ends of the weft by sealing off the edges with glue or needle and thread to prevent the hair from fall off the weft.
Apply glue on the upper edge of the weft and along the section of your natural hair closest to the scalp.
Then press the extensions against the glue in your natural hair. Hold until the glue is dried and the hairpiece sits securely.
Repeat for the desired results and number of pieces.
Removing a glued-on hair weft extensions
To dissolve the glue used to attach the hair weft, use remover. The remover is specially designed to dissolve the ingredients in the glue, be sure they use the right kind.
Begin by sectioning the hair the same way as when you inserted the weft.
Apply remover to the attachment points.
Leave the remover in and allow to work for a few minutes.
Use a rat tail comb to carefully and gently remove the hair weft from your natural hair.
If needed: apply more remover, avoid pulling and causing wear on the hair extension.
Comb out any leftover glue, using more remover if necessary.
Attaching your weft with microrings
You can use microrings to attach your Malaysia Hair Imports hair weft. These are small silicone-coated metal rings that you pinch closed using pliers. The microrings are available in several colors to match your hair and roots. Before you start attaching your hair extensions with microrings, wash your hair with a deep cleansing shampoo. This makes sure that old product residue and grease from the scalp disappears, so the hair attaches better to the microring. You should not use conditioner or other styling products. Allow the hair to dry and make sure it is completely dry when it is time to attach your extensions.
How to install Micro Rings on hair weft:
Create a horizontal part. Measure and cut the weft to the length of the parted section. Secure the ends of the weft by closing the edges with glue or needle and thread to make sure no hairs escape from the weft.
Use hair clips to secure the cut piece to your natural hair.
Place a microring on the needle and open the hook.
Grasp a section of your natural hair and a section of the weft with the hook. (You should feel some slight resistance – if you don’t, more hair is needed to prevent the hair from slipping out.)
Then squeeze the microring firmly with the pliers, pressing hard until it is nearly flat.
Removing your hair weft extensions
When removing your hair weft, use the same pliers as when attaching. The hair should also be completely dry now. In order to minimize wear on your natural hair, you should never tear or pull hard on your hair. Instead, follow our instructions to make the process as smooth and easy as possible.
Use pliers intended for removing and inserting microrings. (The same ones you used attaching your hair extensions.)
Grasp the microring with the pliers. Open the attachment by pinching the microring at the ends. The ring will then return to its an oval/round shape.
Pull out the hairpiece and gently pull out the microring.
Repeat for all pieces.
And you’re done!
Washing your Malaysian Hair Imports Hair Weft Extensions
To make sure your hair extensions have the best possible chance of a long lifetime, we recommend hair care products with a lot of moisture and nutrition.
Tips for a real moisture boost! Use a hair mask at least once a week. Always finish with conditioner.
Use our easy guide if you need to wash your extensions. Always start brushing your hair before washing to remove any tangles. Using a soft hair brush, start the tips and work upwards in sections:
Rinse the hair in lukewarm water.
Apply shampoo to the roots and then conditioner to the tips, avoiding rubbing.
Rinse carefully between applications and then let the hair dry. Also, be sure to straighten out your attachments with your fingers.
Remember not to use conditioner, styling products or heat on your attachments, as this may cause hair to slip out.
Avoid salt or chlorinated water
When swimming, it’s a good idea to put your hair in a bun in the middle of your head, or just use a swim cap. You won’t have to dry your hair, and you’ll avoid damage from salty or chlorinated water.
Brush your Hair Weft Extensions often
Wig brushes are designed for hair extensions and make the hair easy to brush. Brush approximately twice a day, and be sure to comb through your extensions with your fingers. You’ll avoid knots, and your hair will stay fine and glossy. When brushing your extensions, start at the tips and work upwards in sections. This reduces damage and makes the hair easier to detangle.
Brush and sleep with dry hair
Damp hair is more sensitive than dry hair, so it’s a good idea to brush it before you shower. Carefully comb through your moist hair with your fingers and allow it to dry before brushing it again. Sleeping with wet hair is a big no. It will damage both your natural hair and hair extensions, so it’s best to avoid it please make sure your hair and hair extensions are completely dry before bedtime. any questions please contact us and check the Hair Extensions FAQ Page.